The shell is made up of epoxy resin / glass made up of epoxy/ glass composite to meet the demands of long term and continuous use in RO processes. The C-4” series has been designed to operate at a maximum pressure of 1000 psi. The closures have been manufactured in technical plastic and stainless steel, providing high reliability and stability due to their double seal. All materials in contact with water are totally anticorrosive.

PRESSURE VESSEL C SERIES 4 “DIAMETER  – WORKING PRESSURE 1000 psi (70 Kg / cm2)

 

The shell is manufactured according to the Filament-Winding process with cut wires.

 

The manufacturer will supply the following documentation with the deposits on demand:

– Operating and maintenance instructions.

 

The tank is supplied complete, with closures and outlets for pipe connection. Membrane interconnects are not included. Fittings and hoses are not included.

 

The shell has enough diameter to contain the membrane for the reverse osmosis process.

–  Standard membrane length:        21” & 40”

– Standard membrane diameter:       4 ”

– Design pressure:   70 Bar / 1000 psi

– Max. Working pressure:  70 Bar / 1000 psi

– Maximum working temperature: 122ºF (50ºC)

– Minimum working temperature: 34ºF (1ºC)

 

The shell materials will be the following:

– Resina :              Hot Cured Epoxy

– Fibra :                Roving thread.

– Tapa :                 Stainless steel.

 

The depot in service must be free of external stresses and loads outside those inherent in the reverse osmosis process. The safety valves will be placed in the system, not in the swro pressure vessel closure.